Moxa NPort 5410 View larger

Moxa NPort 5410

Moxa NPORT 5410 W/ ADAPTER

    From £

    NPORT 5410 W/ ADAPTER

    Moxa

    1x RJ45 10/100 Mbps, 4x RS-232, DB9 male, 1.5 KV, IP30, 12 to 48 VDC, with Adapter

    More details

    Offers and Prices

    Moxa NPort 5410

    - 10/100M auto-sensing Ethernet
    - 4 serial ports, with support for RS-232, RS-422, and RS-485
    - Built-in 15 KV ESD surge protection for all serial signals
    - Versatile socket operation modes, including TCP Server, TCP Client, UDP, and Real COM
    - Choice of configuration methods: Web console, Telnet console, and Windows utility
    - SNMP MIB-II for network management
    - 2 KV isolation protection for NPort 5430I/5450I/5450I-T
    - 40 to 75°C operating temperature range (T model)
    - Supports Moxa's MXview industrial network management software via the MXview Plug-in

    Network Readiness for up to Four Serial Devices
    NPort 5400 series device servers can conveniently and transparently connect up to four serial devices to an Ethernet network, allowing you to network your existing serial devices with only basic configuration. Data transmission between the serial and Ethernet interfaces is bi-directional. By using NPort device servers, you not only protect your current hardware investment, but also allow for future network expansion. You can both centralize the management of your serial devices, and distribute management hosts over the network.

    Independent Operation Mode for Each Serial Port
    NPort 5400 series device servers can be used to connect different devices for remote data polling or event handling over a TCP/IP network. Each serial port on the NPort 5400 series operates independently to provide maximum versatility. For example, port 1 can operate in Driver mode, port 2 in TCP Server mode, and ports 3 and 4 in TCP Client mode.

    User-friendly LCD Panel for Easy Installation
    An LCD panel is built into the NPort 5400’s top panel, with four buttons for inputting data, configuration, and selecting the operation mode. The LCD panel displays the server name, serial number, and IP address, and can be used to enter or modify parameters such as IP address, netmask, and gateway. (The LCD panel is not available on wide temperature models.)

    Dual DC Power Inputs
    NPort 5400 device servers support dual power sources by providing both a DC terminal block input and a DC power jack input. Providing two types of power input gives users greater flexibility for use with different applications.

    Adjustable Termination and Pull High/Low Resistors
    The NPort 5400 series provides adjustable termination and pull high/low resistors for RS-485 applications. In some critical environments, termination resistors may be needed to prevent the reflection of serial signals, and the pull high/low resistors may need adjusting to maintain the integrity of the electrical signal. Since no set of resistor values is universally compatible with all environments, the NPort® 5400 has four sets of DIP switches on the bottom panel to set the termination and pull high/low resistor values.

    Ports & interfaces

    Ethernet LAN (RJ-45) ports
    1

    Weight & dimensions

    Weight
    740 g

    Power

    Input voltage
    12 - 48

    Operational conditions

    Operating relative humidity (H-H)
    5 - 95%
    Storage temperature (T-T)
    -40 - 85 °C
    Operating temperature (T-T)
    0 - 55 °C

    Technical details

    RS-232 signals
    CTS, DCD, DSR, DTR, GND, RTS
    Baud rate
    921.6 Kbit/s
    Flow control support
    Yes
    Ethernet LAN data rates
    10,100 Mbit/s
    Isolation
    1.5 kV
    Serial interface type
    RS-232
    Serial ports quantity
    4

    Protocols

    Supported network protocols
    ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet, DNS, HTTP, SMTP, SNTP, Rtelnet, ARP

    Indication

    Link/Act LED
    Yes

    Management features

    Management protocols
    SNMP v1

    Other features

    Compatible operating systems
    Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8 x86/x64, 2012 x64, Embedded CE 5.0/6.0, XP Embedded\n\nSCO Unix, SCO OpenServer, UnixWare 7, UnixWare 2.1, SVR 4.2, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i\n\nLinux kernel 2.4.x, 2.6.x, 3.x

    Design

    Safety
    UL 60950-1, EN 60950-1
    Certification
    CE, FCC, EN 55022 Class A, FCC Part 15 Subpart B Class A, \nEN 55024, EN 60601-1-2 Class B, EN 55011

    Data Source: IceCat