Vision TC2-AMP4 audio amplifier

Vision TC2-AMP4

    From £

    TC2-AMP4

    Vision

    2 x 25w @ 8 ohms, 80Hz-22kHz, White

    More details

    Offers and Prices

    Vision TC2-AMP4 audio amplifier

    By using latest low-impedance digital amplifier chip technology the new Techconnect Amp4 module outputs a massive 2 x 25 watts RMS (at 8 ohms) but fits into the space of a Techconnect module.

    Quick-Access Input
    Two Inputs are wired into the rear with removable phoenix connectors, however a new feature of this amplifier is that Input 1 is duplicated on the front panel with a minijack socket for convenience. This half-normalled input disconnects the rear terminal while in use.

    Green D-Class Amplifier
    Digital amplifiers use no power unless they are amplifying program, so even on at full volume; unless it is receiving input it is effectively off. Digital amplifiers also have the advantage of running cold so a bulky heatsink is not necessary… but don’t let size deceive you: the Techconnect Amp4 can drive into a 4 ohm load allowing you to power up to four 8 ohm speakers (or two 4 ohm speakers).

    Preset Memory
    By default when power is activated the Techconnect Amp turns on and resumes the most recent settings. For hospitality applications it can be set to return to a preset input and level whenever it is powered on – for example in hotel guest rooms.TC2-AMP3 module front angle

    LED Display
    A clear display makes the product easy to use and a simple soft-control interface gives instant access to controls. Because the control panel can be installed anywhere in the room it is more convenient than traditional powered speakers where access to the controls can be awkward.

    Remote Control Included
    IR receivers are positioned on the front for normal use and on the rear for integration with a control system such as the Techconnect Control. Note there is no tone control with this amplifier.

    Easy to Install and Uninstall
    A robust product that is simple and easy to install; the inputs and outputs are all via removable phoenix connectors which allow non-technical end users to uninstall it very easily if required. Short input cables are included for connection to the rear of adjacent input modules on the Techconnect.

    Wall Mounted and Secure
    Ideal when you don’t have furniture to sit an amplifier on, and because it is mounted to the wall it is much less obvious as a target for theft. It is close at hand if volume adjustments need to be made, making it perfect for training rooms, boardrooms, and classrooms.

    Integrated Techconnect Family
    Included is a single-gang backbox and surround, or alternatively you can mount the amplifier module in a double-gang surround with other Techconnect modules.

    Display

    Built-in display
    No

    Audio

    Frequency range
    80 - 22000 Hz
    Output impedance
    8
    Input impedance
    50000 Ω
    Input sensitivity
    500 mV
    RMS power output per channel (8 Ohm)
    25 W
    Signal-to-Noise Ratio (SNR)
    98 dB
    Total Harmonic Distortion (THD)
    1%
    Amplifier class
    D
    Audio output channels
    2.0

    Weight & dimensions

    Weight
    63 g
    Height
    40 mm
    Depth
    42 mm
    Width
    71 mm

    Power

    Power consumption (typical)
    50 W
    AC input frequency
    50/60 Hz
    AC input voltage
    100-240 V

    Technical details

    Power requirements
    15V, 4A
    Remote control type
    IR
    Handheld remote control
    Yes
    Connectivity technology
    Wired
    Purpose
    Home
    Colour of product
    White

    Packaging data

    Package weight
    1.1 kg

    Certificates

    Certification
    WEEE, CE/EMC, C-TICK, FCC
    RoHS compliance
    Yes

    Indication

    LED indicators
    Yes

    Data Source: IceCat